海砂淡化设备具有严格的操作流程，操作不当会发生安全事故和严重的设备损坏，还会造成成品沙氯离子不稳定及缓释现象等产品不合格重新翻洗等严重后果。

Sand desalination equipment has strict operating procedures, improper operation accidents and serious damage to the equipment, but also caused the sand chloride unstable phenomenon and release product failed to turn washing and other serious consequences.

正确的海砂淡化设备如下：

The correct operation of desa         cess is as follows:.

开机采用倒序开机法，即：从后往前开机，分别为：淡化机组开启——成品料输送动力——废料动力——供水系统——第三清洗动力——淡化剂搅洗筒——第二清洗动力——第一清洗动力——筛分设备——原料输送动力——给料机

启动过程中，观察各部位旋转方向与操作按钮标示是否一致。若方向相反，应调换电源相线予以纠正。

设备试运转过程中，注意观察传动部件是否有冲击现象或异常噪声，必要时立即停机检查，严禁带病作业。

Boot boot using reverse method, namely: from the back after the boot, respectively: desalination unit opened - finished material transfer power - power supply system: Third - waste cleaning power, desalination agent stirring washing cylinder second cleaning power -- the first cleaning power - screening equipment, raw material conveying power feeder
In the process of starting, observe whether the rotation direction of each part is consistent with the operation button. If the direction is opposite, change the power line to correct it.
During the test operation of the equipment, attention should be paid to whether the transmission parts have impact or abnormal noise. When necessary, the machine is stopped immediately and the disease operation is strictly prohibited.

停机是采用正序停机发，分别为：给料机——原料输送动力——筛分动力——供水系统——第一清洗动力——第二清洗动力——淡化剂搅洗筒——第三清洗动力——淡化机组——废料输送动力——成品沙输送动力

Stop is uses the positive stop, respectively: feeder - raw material conveying power -- power supply system -- the first screening - cleaning power - second cleaning power - desalination agent - Torgovnik stirring washing cylinder third cleaning power - desalination units - waste transfer driving force -- finished sand conveying power

详情登入：http://www.haishadanhuashebei.net